| |
|
Industrial / Other Ideas
!
|
|
|
|
|
|
|
|
|
|
Good Morning
Rob,
As promised here attached are 3 photos
of one of our aircraft.
We operated two similar aircraft in
Tasmania - out of Port Arthur and from
Hobart Wrest Point Casino.
Only the floats and brackets were painted
with WhiteCoat.
It is now nearly 6-7 years since they
were done and the paint has stood up
more than adequately to the demands
it has had put upon it. Haven't seen
what the condition is for over a year,
but understand they still look very
good despite being exposed 365 days
per year to the elements.
We sold the business about 2 years ago
but still get requests for custom bits
and pieces from time to time.
Regards,
Ian Wagner.
Australian Seaplanes Pty Ltd.
PO Box 712,
Buderim.
QLD. 4556 |
|
|
|
|
|
|
|
Lockhart 25lb Artillery Piece
|
| |
|
|
 |
 |
 |
1. After cleaning, the 25 pounder was
painted with two coats of
POR-15
and then a light coat of
Tie-Coat.
|
2. Here you see it with the final dark
green
POR-15
Hardnose
being applied over the
Tie-Coat.
|
3. The finished job in
POR-15 Hardnose
Dark Green.
|
|
|
|
|
|
|
Korea/Samsung Wastewater Treatment
|
 |
 |
 |
Marine Clean throughout and Metal Ready
on the metal components (the tank is
both concrete and metal). Two coats
of POR-15 each approximately
4 mils wft
|
|
|
|
Korea/Incheon Steel
|
|
Surface preparation: Marine Clean and
Metal Ready. Two coats POR-15 and two
coats of Hardnose (in the areas not
subjected to temperatures over 44F)
each approximately 4 mils wft |
|
|
|
|
|
|
|
|
|
|
|
|
Peter Kelsh is in South Australia decided
to paint his tractor in
Hardnose
blue to stop the rust as it’s used a
lot on the beach
"the job went well and is looking good
already. The degreaser is powerful
stuff."
|
|
|
|
Update
Report
"Hello Rob.
I ran the old girl yesterday after successfully
getting fuel through the system. I was impressed
to see no leaks coming from the areas I flooded
with tank sealer.
Looks like it has worked well. It will be another
couple of weeks before I give it a real good test
out. I will now have a go at a couple of oil leak
areas and hopefully will seal them off too.
I sent through the photos so hope they can make
the web page ok.
You can use me as a reference point anytime.
Basically the hard nose was fantastic on the paint
work and was so good to apply.
The fuel leak package you advised me on and sent
me was also great to apply and did the job so well.
Many thanks for the great service and advise Rob.
I suspect you run a success business.
Regards
Peter Kelsh"
|
|
|
|
|
|
Having
used Por15 in other applications we
were really impressed with it and decided
to use it on alot of our equipment in
the factory. When they say hammer tough
they really mean it.
These
frames were coated using Por15
Grey after preparation of Marine Clean,
Metal Ready and Tie Coat. Good finish!
WTG Kurnell
|
|
|
|
This old Blaxland Chapman 4 1/2 HP Super
Pup engine has first been coated with
POR-15 Rust Preventative black paint
and then an enamel for the colour followed
by a coat of either Glisten PC or Pellucid.
Everything has a POR-15 product on it
including the old bakerlite magneto
covers (apparently hard to get anything
to stick to bakerlight.) the brass carbs
have a brushed Glisten PC finish. More
quality workmanship! |
|
|
|
| |
|
If you wish to
add your picture or resto story please email us
at
story@ppc.au.com.
Any stories published here will be entitled to a
free 500ml POR-15 Rust Preventative Paint worth
$39.50.
THANK
YOU
|
