Fireseal 2000

Fixes broken or cracked manifolds

For years we've been working on a product to repair cracks, pits or holes in exhaust manifolds, tailpipes, mufflers or other components subjected to high temperatures while in use. Because replacement parts are often difficult or impossible to find, there is a real need for this type of product in the market place.
Fire Seal 2000 is a single component (no mixing required) ceramic and stainless steel filled putty that is resistant to fuels, oils and corrosive materials. After it is fully cured, it will withstand temperature up to 1100 degrees Celsius. Fire Seal 2000 may be applied to rough-surfaced or sandblasted steel, stainless steel or cast iron.
Use a putty knife, small trowel or spatula to apply. Curing: Let Fire Seal 2000 dry for 16 - 24 hours. Begin final cure by idling engine for 10 - 15 minutes at a time. You may sand Fire Seal 2000 after it is fully cured using a file or medium grit sandpaper.  Each tube of Fire Seal 2000 contains 2 separate repair packets.