|
|
|
 |
Stop Rust Permanently
- the RESTO PROCESS |
|
| |
|
POR 15 restoration products are
designed to work as a complete system. When used together these
products provide you with a coating that will not only stop rust and
corrosion, but will prevent it from returning. The following
products are available individually and many are available in
efficient cost savings kits geared to your specific restoration
needs. Here is how the system works:
Note: The application of POR 15® Rust
Preventive Paint and the use of the Preparation Products will also
depend on the type of material and environment for which it will be used
in.
Very often not all steps will be required for your application, see the
FAQ page.
|
| |
|
BEFORE |
 |
A Good Example of the POR-15 Process
Acid damaged and rusty battery trays are a common problem.
Fix them permanently with POR-15. (battery acid & brake
fluid won't affect it) |
|
STEP 1 |
 |
Marine Clean
Clean the rust or corroded
metal with Marine Clean, an environmentally safe cleaner. Marine
Clean will remove dirt, grease, wax or other contaminants that could
interfere with the restoration. Leave on for approximately 1/2 hour,
repeat if necessary & rinse off with water.
|
|
STEP 2 |
 |
Metal Ready
Prepare the rusty or corroded surface with Metal
Ready. As a rust remover / pre-primer; Metal Ready will neutralise
rust, etch metal for better adhesion, and coat the metal with zinc
phosphate to encourage deep chemical bonding of POR 15® Rust
Preventive Paint to the base metal and rust. Do not leave on for
more than 1/2 hour & rinse well with water. DRY WELL.
|
|
STEP 3 |
 |
POR 15® Rust Preventive Paint
Now seal
that rusty or corroded metal with POR 15® Rust Preventive Paint. As
the moisture resistant POR® 15 Rust Preventive Paint bonds to the
rusty metal, it will form an unbelievably tough, almost ceramic like
finish that won't crack, chip or peel. Two coats for most general
applications and three is recommended for marine use.
|
|
STEP 4 |
 |
Topcoats
&
Tie-Coat
Now you
have the option of applying one of our topcoats, Chassiscoat,
Blackcote, Whitecote, or any other topcoat system as POR 15® Rust
Preventive Paint is compatible with all paint systems. Or apply
Tie-Coat our sandable primer before topcoating.
|
|
AFTER |
 |
"New Battery Tray"
Now you
have a permanently repaired battery tray, that will NOT rust or
corrode again, in spite of old leaky batteries. |
|
|
| |
|
